Jet JOSS-S Oscillating Spindle Sander
New design with many user friendly features
This is a very versatile machine with many uses in the trade workshop. The sander by virtue of its name oscillates up and down whilst rotating at 1,400rpm, ensuring that the abrasive is not continually exposed at the same point reducing burning and creating a better quality of finish. The stroke is some 38mm long and is driven by worm drive gears working in an oil filled gearbox. The large cast iron table gives adequate support to nearly all types of work, has a 90° positive stop and can be tilted to a full 45° if required. The machine is supplied with ten metric bobbins all with sanding sleeves attached and the bobbins fit with a taper into the main drive shaft of the machine. The sleeves are spirally wound to ensure that they have no bump where the join is; they are more expensive than simple belts but they do leave an excellent finish on nearly all materials. The machine is floor standing with feet and has no castors or wheels; if the machine needs to be moved on a regular basis, we recommend the purchase of our mobile base unit (code 708118). A fine dust extractor is recommended. Supplied with table insert, service tools, 100mm dust extraction outlet and sanding spindles 6, 9, 12, 19mm plus rubber drums of 25mm, 38mm, 50mm, 75mm and 100mm.