Jet JWL 1221VS Lathe

Jet JWL 1221VS Lathe

brand image


Jet JWL 1221VS Lathe
Code: 118255

The Jet JWL 1221VS Woodturning Lathe.
Fully cast iron construction with an extra wide bed, superbly stable.
Exceptionally wide range of spindle speeds, 60-4,000rpm.
Innovative ratchet style belt tensioning system, perfect every time.
Conveniently located motor controls and speed DRO.
24 integrated indexing positions and spring loaded spindle lock.
Smooth transition between forward and reverse for easy control.

The Jet JWL1221VS is different to every other lathe in the Jet range. The whole lathe has been designed to make the woodturning experience better by focusing on control.As with all other JET lathes, this one is made from cast iron, but the bed width is much wider than is usually found on machines of this size. This gives great support to the tool rest holder, which also stays exactly where you clamp it even under the heaviest loads. The spindle is supported by heavy duty bearings and is quietly driven by a 745W DC motor via a 6 groove belt system. All of the motor controls are very conveniently located together; the speed control, spindle speed digital readout and forward/reverse selector all come naturally to hand. The tall, rigid tailstock has an ACME barrel lead screw with 64mm of travel, the barrel and headstock spindles have 2MT tapers. Camlocks on both tailstock and toolrest holder allow easy positioning just where you want them. To help keep things tidy there are tool and cable storage fittings on the bed, keeping those essential tools within easy reach. Although this is a great bench top lathe, with the optional extension bed and matching lathe and bed stands you can expand this lathe into a floor standing machine with over 1,000mm between centres. The lathe stand has a built-in storage tray plus wide feet for stability, whilst the bed extension is an exact match to the lathe bed, giving a completely integrated look to whole machine. This is without doubt a very fine small lathe.

Distance Between Centres 520mm. Max Diameter over Bed318m

Swing Over Bed (In.) 12-1/2 318mm
Swing Over Tool Rest Base (In.) 9-9/20
Distance Between Centers (In.) 20-1/2 520mm
Spindle Bore (In.) 3/8
Spindle Taper MT2

Nett Weight 50kg
Overall L x W x H 1,003 x 229 x 445mm
Power 745W (230V, 1ph)
Speed 60-3,600rpm
Spindle Thread M33 x 3.5mm