0

Trend Lock Jig

Trend Lock Jig

brand image
Trend Lock Jig
Code: 50862
Qty   
  • For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
  • Deeper mortises can be achieved with a suitable size of auger bit.
  • Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
  • Steel plates & body.
  • An auger bit and drill is required to complete deep mortises.
  • The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
  • Door thickness min. 34 mm
  • Door thickness max. 58 mm
  • Template outer size: 234.3 x 59.8 x1.5mm
  • Metric (Imperial approx.) (D x OL): Template
  • 22.2x156 mm (7/8"x 6 1/8"): 1
  • 22.5x152.5 mm (7/8"x 6"): 2
  • 25.4x121 mm (1"x 4 3/4"): 3
  • 25.4x127.5 mm (1"x 5"): 4
  • 25.4x133.5 mm (1"x 5 1/4"): 5
  • 25.4x145 mm (1"x 5 3/4"): 6
  • 25.4x153 mm (1"x 6"): 7
  • 25.4x156.5 mm (1"x 6"): 8
  • 25.4x165.5 mm (1"x 6 1/2"): 9
  • 25.4x177 mm (1"x 7"): 10
  • 25x57.5 mm (1"x 2 1/4"): 11 UPPER
  • 26x56.5 mm (1"x 2 1/4"): 11 LOWER
  • 25.6x162mm (1"x 6 3/8"): 12